PA66 A218G2V30 BK SOLVAY FRANCE

Form：Granules | Grade：Enhanced level

Properties:

Thermal stabilityGlass fiber reinforced

Typical Applications:

Automotive sector

Supplier(1)

Product Description

Certificates(0)

Datasheet

Product Description

Typical Applications:	Automotive sector
Properties:	Thermal stability \| Glass fiber reinforced

Certificates

No Data...

Technical Data Sheet

impact performance	Test Condition	Test Method	Test Result	Test Unit
Impact strength of simply supported beam without notch	23°C	ISO 179/1eU	87	kJ/m²
flammability	Test Condition	Test Method	Test Result	Test Unit
UL flame retardant rating	1.6 mm	UL 94	HB
mechanical properties	Test Condition	Test Method	Test Result	Test Unit
Tensile modulus	23°C	ISO 527-2/1A	10000	Mpa
tensile strength	Break, 23°C	ISO 527-2/1A	195	Mpa
Tensile strain	Break, 23°C	ISO 527-2	3.0	%
Bending modulus	23°C	ISO 178	9200	Mpa
bending strength	23°C	ISO 178	290	Mpa
injection	Test Condition	Test Method	Test Result	Test Unit
drying temperature			80	°C
Suggested maximum moisture content			0.15	%
Temperature at the rear of the barrel			270 to 280	°C
Temperature in the middle of the barrel			275 to 285	°C
Temperature at the front of the material cylinder			280 to 290	°C
Mold temperature			70 to 100	°C
thermal performance	Test Condition	Test Method	Test Result	Test Unit
Hot deformation temperature	1.8 MPa, Unannealed	ISO 75-2/Af	250	°C
Melting temperature		ISO 11357-3	262	°C
Physical properties	Test Condition	Test Method	Test Result	Test Unit
Shrinkage rate	横向Flow	ISO 294-4	1.1	%
Shrinkage rate	Shrinkage rate	Flow	ISO 294-4	0.40	%
Water absorption rate	24 hr, 23°C	ISO 62	0.80	%

IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.

Get App

Top