Technical Data Sheet
| physical property | Test Condition | Test Method | Test Result |
|---|
| Density | | ISO 1183 | 1.37 g/cm³ |
| Water absorption rate | | ISO 62 | 4.5 % |
| Water absorption rate | | ISO 62 | 0.8 % |
| Mechanical properties | Test Condition | Test Method | Test Result |
|---|
| Tensile modulus | | ISO 527-2 | 9300 Mpa |
| Tensile strength | | ISO 527-2 | 249 Mpa |
| tensile strength | | ISO 527-2 | 165 Mpa |
| Tensile strain | | ISO 527-2 | 3.6 % |
| Tensile strain | | ISO 527-2 | 3.5 % |
| Impact resistance | Test Condition | Test Method | Test Result |
|---|
| Impact strength of simply supported beam gap | | ISO 179 | 10 kJ/m² |
| Impact strength of simply supported beam gap | | ISO 179 | 19 kJ/m² |
| Impact strength of simply supported beam without notch | | ISO 179 | 90 kJ/m² |
| Impact strength of simply supported beam without notch | | ISO 179 | 95 kJ/m² |
| Impact strength of cantilever beam gap | | ISO 180 | 23 kJ/m² |
| Flame retardant performance | Test Condition | Test Method | Test Result |
|---|
| UL flame retardant rating | | UL 94 | HB |
| UL flame retardant rating | | UL 94 | HB |
| UL flame retardant rating | | UL 94 | HB |
| Electrical performance | Test Condition | Test Method | Test Result |
|---|
| Volume resistivity | | IEC 60093 | > 1.0E+15 ohms·cm |
| dielectric constant | | IEC 60250 | 4.3 |
| Dissipation Factor | | IEC 60250 | 0.03 |
| Compared to the leakage trace index | | IEC 60112 | 600 V |
| Thermal performance | Test Condition | Test Method | Test Result |
|---|
| Melting temperature | | ISO 3146 | 295 °C |
| | | 0.000055 1/℃ |
| Linear coefficient of thermal expansion | | | 0.000025 1/℃ |
| Electrical performance | | UL 746 | 140 °C |
| Electrical performance | | UL 746 | 140 °C |
| Electrical performance | | UL 746 | 140 °C |
| Strength and mechanical properties | | UL 746 | 120 °C |
| Strength and mechanical properties | | UL 746 | 140 °C |
| Strength and mechanical properties | | UL 746 | 140 °C |
| Impact mechanical performance | | UL 746 | 100 °C |
| Impact mechanical performance | | UL 746 | 110 °C |
| Impact mechanical performance | | UL 746 | 115 °C |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.
Compare