TPE G7960-1 GLS USA

Form：Granules | Grade：Injection grade

Properties:

High mobilityRecyclableEasy to process

Typical Applications:

Washerpackingsporting goodsconsumablesPhone caseProfileHousehold daily necessitiesWrapping moldingFood service sectorNon specific food applicationsSoft handleKitchen utensilsSoft touch applicationConsumer product application fieldHousehold goods

Supplier(1)

Product Description

Certificates(0)

Datasheet

Product Description

Typical Applications:	Washer \| packing \| sporting goods \| consumables \| Phone case \| Profile \| Household daily necessities \| Wrapping molding \| Food service sector \| Non specific food applications \| Soft handle \| Kitchen utensils \| Soft touch application \| Consumer product application field \| Household goods
Properties:	High mobility \| Recyclable \| Easy to process

Certificates

No Data...

Technical Data Sheet

Filling analysis	Test Condition	Test Method	Test Result	Test Unit
Apparent viscosity	200°C,11200sec^-1	ASTM D3835	9.30	Pa·s
elastomer	Test Condition	Test Method	Test Result	Test Unit
Permanent compression deformation	23°C,22hr	ASTM D395B	17	%
tensile strength	100%Strain,23°C	ASTM D412	2.14	Mpa
	tensile strength	300%Strain,23°C	ASTM D412	2.62	Mpa
	tensile strength	tensile strength	Break,23°C	ASTM D412	6.34	Mpa
elongation	Break,23°C	ASTM D412	760	%
tear strength		ASTM D624	24.5	kN/m
Physical properties	Test Condition	Test Method	Test Result	Test Unit
melt mass-flow rate	200°C/5.0kg	ASTM D1238	11	g/10min
Shrinkage rate	MD	ASTM D955	0.90-1.5	%
hardness	Test Condition	Test Method	Test Result	Test Unit
Shore hardness	ShoreA,10Sec	ASTM D2240	60

IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.

Get App

Top