PMMA ACRYPET™ VH001
731
- Properties:UV resistancestandardHigh temperature resistanWeather resistancetransparentHas the best heat resistaClimate resistance
- Usages:Household appliancesHousehold appliancesCastersOptical levelvehiclelightingOptical Products
- Certificates:ULSGS
Technical Data Sheet
physical property | Test Condition | Test Method | Test Result |
---|---|---|---|
density | ISO 1183 | 1.19 g/cm | |
Haze ratio | ISO 14782 | 0.3 % | |
refractive index | ISO 489 | 1.49 | |
transmittance | ISO 13468-1 | 93 % |
Basic performance | Test Condition | Test Method | Test Result |
---|---|---|---|
Water absorption rate | ISO 62 | 0.3 % | |
melt mass-flow rate | ISO 1133 | 2.0 g/10min |
Mechanical properties | Test Condition | Test Method | Test Result |
---|---|---|---|
Impact strength of cantilever beam gap | JIS K-7110 | 1.7 KJ/m | |
elongation | ISO 527-2 | 6 % | |
bending strength | ISO 178 | 127 Mpa | |
tensile strength | ISO 527-2 | 78 Mpa | |
Impact strength of cantilever beam gap | JIS K-7111 | 1.3 KJ/m | |
JIS K-7111 | 21 KJ/m | ||
Flexural modulus | ISO 178 | 3.3 GPa | |
Rockwell hardness | ISO 2039 | 101 M Scale | |
Tensile modulus | ISO 527-2 | 3.3 GPa |
Electrical performance | Test Condition | Test Method | Test Result |
---|---|---|---|
Volume resistivity | JIS K-6911 | >10 Ω | |
JIS K-6911 | >10 Ωm | ||
dielectric constant | JIS K-6911 | 3.7 | |
dielectric strength | JIS K-6911 | 20 MV/m | |
dielectric loss tangent | JIS K-6911 | 0.05 | |
arc resistance | JIS K-6911 | 没有痕迹 |
Thermal performance | Test Condition | Test Method | Test Result |
---|---|---|---|
Linear coefficient of thermal expansion | JIS K-7197 | 6×10 1/℃ | |
spiral flow length | 三菱丽阳法 | 130 mm | |
三菱丽阳法 | 220 mm | ||
specific heat | JIS K-7123 | 1.5 J/(g·℃) | |
vicat | ISO 306 | 108 °C | |
Heat distortion temperature | ISO 75-2 | 101 °C | |
Heat transfer rate | JIS A-1412 | 0.2 W/(m·℃) |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.
Contact Us
Get App
Top