Technical Data Sheet
| physical property | Test Condition | Test Method | Test Result |
|---|
| Shrinkage rate | | ASTM D955 | 1.1-1.5 % |
| Shrinkage rate | | 内部方法 | 0.90-1.2 % |
| Shrinkage rate | | 内部方法 | 0.80-1.1 % |
| Water absorption rate | | ASTM D570 | 0.40 % |
| Water absorption rate | | ASTM D570 | 3.6 % |
| hardness | Test Condition | Test Method | Test Result |
|---|
| Rockwell hardness | | ASTM D785 | 118 |
| flammability | Test Condition | Test Method | Test Result |
|---|
| UL flame retardant rating | | UL 94 | HB |
| Mechanical properties | Test Condition | Test Method | Test Result |
|---|
| Taber abraser | | ASTM D1044 | 19.0 mg |
| tensile strength | | ASTM D638 | 60.0 Mpa |
| tensile strength | | ASTM D638 | 56.5 Mpa |
| elongation | | ASTM D638 | 9.0 % |
| elongation | | ASTM D638 | 52 % |
| Flexural modulus | | ASTM D790 | 2240 Mpa |
| bending strength | | ASTM D790 | 89.6 Mpa |
| Impact resistance | Test Condition | Test Method | Test Result |
|---|
| Suspended wall beam without notch impact strength | | ASTM D4812 | 3200 J/m |
| Suspended wall beam without notch impact strength | | ASTM D4812 | 3200 J/m |
| Suspended wall beam without notch impact strength | | ASTM D4812 | 3200 J/m |
| Dart impact | | ASTM D3763 | 19.7 J |
| Dart impact | | ASTM D3763 | 36.0 J |
| Dart impact | | ASTM D3763 | 46.1 J |
| Thermal performance | Test Condition | Test Method | Test Result |
|---|
| Heat distortion temperature | | ASTM D648 | 156 °C |
| Heat distortion temperature | | ASTM D648 | 128 °C |
| vicat | | ASTM D15255 | 233 °C |
| vicat | | ASTM D15256 | 232 °C |
| Linear coefficient of thermal expansion | | ASTME831 | 9E-05 cm/cm/°C |
| RTI Elec | | UL 746 | 50.0 °C |
| RTI Imp | | UL 746 | 50.0 °C |
| RTI | | UL 746 | 50.0 °C |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.
Compare
View Prices