Technical Data Sheet
| physical property | Test Condition | Test Method | Test Result |
|---|
| density | | ASTMD792 | 1.65 g/cm³ |
| Shrinkage rate | | ASTMD955 | 0.300.90 % |
| Water absorption rate | | ASTMD570 | 0.050 % |
| hardness | Test Condition | Test Method | Test Result |
|---|
| Rockwell hardness | M-Scale | ASTMD785 | 95 |
| flammability | Test Condition | Test Method | Test Result |
|---|
| UL flame retardant rating | | UL94 | V-0 |
| Mechanical properties | Test Condition | Test Method | Test Result |
|---|
| tensile strength | Yield | ASTMD638 | 145 MPa |
| elongation | Break | ASTMD638 | 2.0 % |
| Flexural modulus | | ASTMD790 | 12000 MPa |
| bending strength | Yield | ASTMD790 | 220 MPa |
| Impact resistance | Test Condition | Test Method | Test Result |
|---|
| Impact strength of cantilever beam gap | | ASTMD256 | 77 J/m |
| Electrical performance | Test Condition | Test Method | Test Result |
|---|
| Volume resistivity | | ASTMD257 | 1E+18 ohms·cm |
| dielectric strength | | ASTMD149 | 25 kV/mm |
| arc resistance | | ASTMD495 | 83.0 sec |
| Thermal performance | Test Condition | Test Method | Test Result |
|---|
| melting temperature | | DSC | 255 °C |
| | ASTMD696 | 3E-05 cm/cm/°C |
| RTI Elec | | UL746 | 130 °C |
| RTI Imp | | UL746 | 130 °C |
| RTI | | UL746 | 130 °C |
| | ASTMD648 | 245 °C |
| | ASTMD648 | 215 °C |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.
Compare