PC 243R-111 SABIC INNOVATIVE SINGAPHORE

Form：Granules | Grade：Flame retardant grade

Properties:

Flame retardant

Typical Applications:

Industrial applicationsAutomotive sectorElectrical appliancesLighting applicationsPlastic bagfibreBlow molding applications

Supplier(1)

Product Description

Certificates(0)

Datasheet

Product Description

Typical Applications:	Industrial applications \| Automotive sector \| Electrical appliances \| Lighting applications \| Plastic bag \| fibre \| Blow molding applications
Properties:	Flame retardant

Certificates

No Data...

Technical Data Sheet

optical performance	Test Condition	Test Method	Test Result	Test Unit
turbidity	2540μm	ASTM D1003	1.0	%
transmissivity	2540μm	ASTM D1003	88.0	%
Refractive index		ASTM D542	1.586
impact performance	Test Condition	Test Method	Test Result	Test Unit
Dart impact	23°C	ASTM D3029	169	J
Impact strength of cantilever beam gap		ASTM D1822	546	kJ/m²
	Impact strength of cantilever beam gap	23°C	ASTM D4812	3200	J/m
	Impact strength of cantilever beam gap	Impact strength of cantilever beam gap	23°C	ASTM D256	800	J/m
flammability	Test Condition	Test Method	Test Result	Test Unit
Extreme Oxygen Index		ASTM D2863	25	%
UL flame retardant rating	6.0mm	UL 94	V-0
UL flame retardant rating	UL flame retardant rating	0.75mm	UL 94	V-2
mechanical properties	Test Condition	Test Method	Test Result	Test Unit
tensile strength	Yield	ASTM D638	62.1	Mpa
tensile strength	tensile strength	Break	ASTM D638	65.5	Mpa
bending strength	Yield,50.0mmSpan	ASTM D790	93.1	Mpa
Taber abraser	1000Cycles,1000g,CS-17Wheel	ASTM D1044	10.0	mg
elongation	Yield	ASTM D638	7.0	%
elongation	elongation	Break	ASTM D638	110	%
Bending modulus	50.0mmSpan	ASTM D790	2340	Mpa
thermal performance	Test Condition	Test Method	Test Result	Test Unit
Hot deformation temperature	0.45MPa,Unannealed,6.40mm	ASTM D648	138	°C
specific heat		ASTMC351	1260	J/kg/°C
Linear coefficient of thermal expansion	MD：-40to95°C	ASTME831	6.8E-05	cm/cm/°C
Vicat softening temperature		ASTM D15255	154	°C
Hot deformation temperature	1.8MPa,Unannealed,6.40mm	ASTM D648	132	°C
thermal conductivity		ASTMC177	0.27	W/m/K
RTI Elec		UL 746	130	°C
RTI Str		UL 746	130	°C
RTI Imp		UL 746	130	°C
Physical properties	Test Condition	Test Method	Test Result	Test Unit
Water absorption rate	Equilibrium,100°C	ASTM D570	0.58	%
Outdoor applicability		UL 746C	f1
Water absorption rate	Equilibrium,23°C	ASTM D570	0.35	%
Water absorption rate	Water absorption rate	24hr	ASTM D570	0.15	%
Shrinkage rate	MD：3.20mm	Internal Method	0.50-0.70	%
melt mass-flow rate	300°C/1.2kg	ASTM D1238	11	g/10min
density		ASTM D792	1.19	g/cm³
Specific volume		ASTM D792	0.830	cm³/g
density		ASTM D792	1.20	g/cm³
Electrical performance	Test Condition	Test Method	Test Result	Test Unit
Hot wire ignition	HWI	UL 746	PLC 4
High voltage arc tracing rate	HVTR	UL 746	PLC 2
Compared to the anti leakage trace index	CTI	UL 746	PLC 2
High arc combustion index	HAI	UL 746	PLC 1
Dissipation factor	1MHz	ASTM D150	0.010
	Dissipation factor	60Hz	ASTM D150	9E-04
	Dissipation factor	Dissipation factor	50Hz	ASTM D150	9E-04
Dielectric constant	1MHz	ASTM D150	2.96
	Dielectric constant	60Hz	ASTM D150	3.17
	Dielectric constant	Dielectric constant	50Hz	ASTM D150	3.17
Dielectric strength	3.20mm,inAir	ASTM D149	15	KV/mm
Volume resistivity		ASTM D257	>1.0E+17	ohms·cm
hardness	Test Condition	Test Method	Test Result	Test Unit
Rockwell hardness	R-Sale	ASTM D785	118
Rockwell hardness	Rockwell hardness	M-Sale	ASTM D785	70

IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.

Get App

Top