PMMA ShinkoLite-P UT-100
0
- Properties:Transparenthigh glossinessgood impact resistanceextremely low or no odorgood chemical resistanceweather resistancehigh heat resistancegood dimensional stabilityand good flowability
- Usages:Pipes and strips
CompareTechnical Data Sheet
| physical property | Test Condition | Test Method | Test Result |
|---|---|---|---|
| density | 1.19 g/cm3 |
| optical performance | Test Condition | Test Method | Test Result |
|---|---|---|---|
| refractive index | 1.510 |
| Mechanical properties | Test Condition | Test Method | Test Result |
|---|---|---|---|
| Rockwell hardness | R计称 | 104 |
| Test Condition | Test Method | Test Result | |
|---|---|---|---|
| Flexural modulus | 3140 MPa | ||
| bending strength | 118 MPa | ||
| melt mass-flow rate | 230℃，3.8kg | 2 g/10min | |
| Shrinkage rate | 流动 | 0.2-0.5 % | |
| Water absorption rate | 24小时 | 1.7 % | |
| tensile strength | 断裂 | 77.6 MPa | |
| tensile elongation | 断裂 | 4.3 % | |
| Impact strength of cantilever beam gap | 6.35mm | 14.7 J/m | |
| transmissivity | 92 % | ||
| muddy | 0.50 % |
| Thermal performance | Test Condition | Test Method | Test Result |
|---|---|---|---|
| Heat distortion temperature | 1.8MPa，未退火 | 120 ℃ |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.
Contact Us
Get App
Top