Ethylene Copolymer Teflon® PFA 940HP Plus

Properties:
Thermal performance
Compare

Technical Data Sheet

	Test Condition	Test Method	Test Result
melting temperature		ASTM D4591	290 °C
Volume resistivity		ASTM D257	1E+18 ohms·cm
Volume resistivity	Volume resistivity		ISO 1325	1E+18 ohms·cm
dielectric strength		ASTM D149	80 kV/mm
dielectric strength	dielectric strength		IEC 60243-1	80 kV/mm
dielectric constant		ASTM D150	2.03
dielectric constant	dielectric constant		IEC 60250	2.03
Dissipation Factor		ASTM D150	<2.0E-4
Shore hardness		ASTM D2240	55
Shore hardness	Shore hardness		ISO 868	55
tensile strength		ISO 12086	11.0 MPa
elongation		ASTM D3307	310 %
elongation	elongation		ASTM D3307	450 %
Tensile strain		ISO 12086	310 %
Tensile strain	Tensile strain		ISO 12086	450 %
Flexural modulus		ASTM D790	650 MPa
	Flexural modulus		ASTM D790	60.0 MPa
		Flexural modulus		ISO 178	650 MPa
		Flexural modulus	Flexural modulus		ISO 178	60.0 MPa
Dissipation Factor		IEC 60250	<2.0E-4
UL flame retardant rating		UL 94	V-0
Limiting Oxygen Index		ASTM D2863	>95 %
Limiting Oxygen Index	Limiting Oxygen Index		ISO 4589-2	>95 %
critical shear rate			56.0 sec^-1
MITFoldingEndurance		ASTM D2176	3E+05 Cycles
tensile strength		ISO 12086	28.0 MPa
density		ASTM D792	2.14 g/cm³
melt mass-flow rate		ASTM D3307	16 g/10min
melt mass-flow rate	melt mass-flow rate		ISO 12086	16 g/10min
Water absorption rate		ASTM D570	<0.030 %
tensile strength		ASTM D3307	28.0 MPa
tensile strength	tensile strength		ASTM D3307	11.0 MPa

IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.

Get App

Top