HDPE LUVOCOM® 90-8544/BL
0
- Usages:Moldsmoldstoolsthin-walled componentscontainersfood containersmachinesmechanical componentsmolds
CompareTechnical Data Sheet
| physical property | Test Condition | Test Method | Test Result |
|---|---|---|---|
| Water absorption rate | <0.10 % | ||
| density | ISO1183 | 1.18 g/cm³ | |
| Shrinkage rate | DIN16901 | 3.0到5.0 % |
| Mechanical properties | Test Condition | Test Method | Test Result |
|---|---|---|---|
| Tensile modulus | ISO527-2 | 900 MPa | |
| Tensile stress | Break | ISO527-2 | 20.0 MPa |
| Tensile strain | Yield | ISO527-2 | 9.0 % |
| Impact resistance | Test Condition | Test Method | Test Result |
|---|---|---|---|
| Impact strength of simply supported beam without notch | ISO179/1fU | 无断裂 | |
| ISO179/1fU | 无断裂 |
| Electrical performance | Test Condition | Test Method | Test Result |
|---|---|---|---|
| Surface Resistivity | IEC60093 | >1.0E+9 ohms | |
| insulation resistance | IEC60167 | >1.0E+9 ohms |
| Thermal performance | Test Condition | Test Method | Test Result |
|---|---|---|---|
| Continuous use temperature | UL746B | 80.0 °C | |
| Maximum operating temperature - SharrTerm | 110 °C | ||
| vicat | ISO306/A | 125 °C |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.
Contact Us
Get App
Top