PPO(PPE)+TPE NORYL™ WCD841U resin SABIC

0

Technical Data Sheet

physical property Test ConditionTest MethodTest Result
densityASTM D7921.08 g/cm³
melt mass-flow rateASTM D123823 g/10min
hardnessTest ConditionTest MethodTest Result
Shore hardnessASTM D224084
flammabilityTest ConditionTest MethodTest Result
Burning wire flammability indexIEC 60695-2-12960 °C
Hot filament ignition temperatureIEC 60695-2-13750 °C
Limiting Oxygen IndexISO 4589-225 %
Smoke densityASTME662130
Smoke densityASTME662170
VWUL 1581Pass
Mechanical propertiesTest ConditionTest MethodTest Result
elongationBreakUL 1581300 %
elongationASTM D638250 %
elongationUL 1581240 %
Tensile strainBreakISO 527-2/50220 %
Flexural modulusASTM D79094.0 MPa
Flexural modulusISO 17894.0 MPa
tensile strength BreakUL 158118.0 MPa
tensile strength ASTM D63818.0 MPa
tensile strength UL 158120.0 MPa
tensile strength BreakISO 527-2/5017.0 MPa
Electrical performanceTest ConditionTest MethodTest Result
Volume resistivityASTM D2574.2E+15 ohms·cm
dielectric strengthIEC 60243-122 kV/mm
dielectric constantASTM D1502.60
Dissipation FactorASTM D1506E-03
Compared to the Leakage Tracking Index (CTI)IEC 60112PLC 0
Thermal performanceTest ConditionTest MethodTest Result
brittle temperatureASTM D746<-40.0 °C
UL temperature ratingUL 158180 °C
Heat distortion temperatureUL 158119 %
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.

Contact Us

Get App

Top