PC S-3000UR MITSUBISHI ENGINEERING JAPAN

Form：Granules | Grade：Weather resistant grade

Properties:

high strengthWeather resistanceUV resistanceLow viscosityGood weather resistanceGood demolding performancFDA certification

Typical Applications:

Automotive sector

Supplier(1)

Product Description

Certificates(2)

Datasheet

Product Description

Typical Applications:	Automotive sector
Properties:	high strength \| Weather resistance \| UV resistance \| Low viscosity \| Good weather resistance \| Good demolding performanc \| FDA certification

Certificates

TDS

Technical Data Sheet

mechanical properties	Test Condition	Test Method	Test Result	Test Unit
Impact strength of cantilever beam gap		ASTM D256	740-1000	J/m
Bending modulus		ASTM D790	2.3	GPa
bending strength		ASTM 790	80.4-90.2	Mpa
Stretching length		ASTM D638	90-140	%
tensile strength		ASTM D638	58.8-68.6	Mpa
thermal performance	Test Condition	Test Method	Test Result	Test Unit
Combustibility		UL 94	HB
Linear coefficient of thermal expansion			6-7
Hot deformation temperature	18.6kgf/cm	ASTM D648	130-136	°C
Hot deformation temperature	Hot deformation temperature	4.6kgf/cm	ASTM D648	136-142	°C
Physical properties	Test Condition	Test Method	Test Result	Test Unit
melt mass-flow rate	300℃,1.2kg		11-14.5	g/10min
Shrinkage rate	Across Flow		0.5-0.8	%
Shrinkage rate	Shrinkage rate	Flow		0.5-0.8	%
Rockwell hardness		ASTM D785	123	R
Water absorption rate	23℃,24hrs	ASTM D570	0.23-0.26	%
Electrical performance	Test Condition	Test Method	Test Result	Test Unit
Dielectric constant	10	ASTM D150	25.2	Pf/m
Dielectric strength		ASTM D149	18-22	KV/mm
Dielectric loss	10，Tangent	ASTM D150	0.0082

IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.

Get App

Top