Technical Data Sheet
| physical property | Test Condition | Test Method | Test Result |
|---|
| density | | ISO1183 | 1.42 g/cm³ |
| Shrinkage rate | | | 0.70 % |
| Shrinkage rate | | | 0.30 % |
| Water absorption rate | | ISO62 | 0.50 % |
| hardness | Test Condition | Test Method | Test Result |
|---|
| Rockwell hardness | M-Scale | ASTMD785 | 104 |
| Filling analysis | Test Condition | Test Method | Test Result |
|---|
| MeltViscosity | | 内部方法 | 0.730 kPa |
| Mechanical properties | Test Condition | Test Method | Test Result |
|---|
| Flexural modulus | | ISO178 | 6400 MPa |
| Compression Modulus | | ISO604 | 12000 MPa |
| compression stress | | ISO604 | 200 MPa |
| shear modulus | | ISO15310 | 2200 MPa |
| shear strength | | ASTMD732 | 95.0 MPa |
| Poisson's ratio | | ASTME132 | 0.41 |
| Bending stress | | ISO178 | 240 MPa |
| Bending stress | | ISO178 | 164 MPa |
| Tensile modulus | | ISO527-2 | 15000 MPa |
| Tensile stress | Yield | ISO527-2 | 155 MPa |
| Tensile stress | | ISO527-2 | 98.0 MPa |
| Tensile strain | Break | ISO527-2 | 2.2 % |
| Tensile strain | | ISO527-2 | 2.8 % |
| Flexural modulus | | ISO178 | 12500 MPa |
| Impact resistance | Test Condition | Test Method | Test Result |
|---|
| Impact strength of cantilever beam gap | | ISO180 | 5.7 kJ/m² |
| | ISO180 | 33 kJ/m² |
| Thermal performance | Test Condition | Test Method | Test Result |
|---|
| | ASTMD696 | 8E-06 cm/cm/°C |
| | ASTMD696 | 1.5E-05 cm/cm/°C |
| melting temperature | | | 343 °C |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.
Compare