Unspecified ADDILENE J 490 S ADDIPLAST FRANCE

Product Description

Certificates(0)

Datasheet

Product Description

Certificates

No Data...

Technical Data Sheet

impact performance	Test Condition	Test Method	Test Result	Test Unit
Charpy Notched Impact Strength		ISO 179/1eA	10	kJ/m²
Impact strength of simply supported beam without notch		ISO 179/1eU	无断裂
Impact strength of cantilever beam gap		ISO 180/1A	10	kJ/m²
flammability	Test Condition	Test Method	Test Result	Test Unit
UL flame retardant rating	1.6mm	UL 94	V-2
Hot filament ignition temperature		IEC 60695-2-13	960	°C
Extreme Oxygen Index		ISO 4589-2	26	%
mechanical properties	Test Condition	Test Method	Test Result	Test Unit
tensile strength	Break	ISO 527-2	26.0	MPa
Tensile strain	Break	ISO 527-2	>100	%
Bending modulus		ISO 178	1000	MPa
thermal performance	Test Condition	Test Method	Test Result	Test Unit
Hot deformation temperature	1.8MPa,Unannealed	ISO 75-2/Af	51.0	°C
Vicat softening temperature		ISO 306/A50	152	°C
Melting temperature		ISO 3146	165to168	°C
Physical properties	Test Condition	Test Method	Test Result	Test Unit
melt mass-flow rate	230°C/2.16kg	ISO 1133	12	g/10min
density		ISO 1183/A	0.940	g/cm³
Electrical performance	Test Condition	Test Method	Test Result	Test Unit
Compared to the anti leakage trace index	SolutionA	IEC 60112	PLC 0
Surface resistivity		IEC 60093	1E+13	ohms
Volume resistivity		IEC 60093	1E+15	ohms·cm
Dielectric strength		IEC 60243-1	43	kV/mm
hardness	Test Condition	Test Method	Test Result	Test Unit
Shore hardness	ShoreD	ISO 868	65

IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.

Get App

Top