Technical Data Sheet
| physical property | Test Condition | Test Method | Test Result |
|---|
| Shrinkage rate | | ASTMD955 | 0.60 % |
| hardness | Test Condition | Test Method | Test Result |
|---|
| Rockwell hardness | | ASTMD785 | 110 |
| optical performance | Test Condition | Test Method | Test Result |
|---|
| transmissivity | | ASTMD1003 | 91.0 % |
| Haze ratio | | ASTMD1003 | <1.0 % |
| Impact resistance | Test Condition | Test Method | Test Result |
|---|
| Suspended wall beam without notch impact strength | | ASTMD4812 | 无断裂 |
| Dart impact equipped with measuring instruments | | ASTMD3763 | 67.0 J |
| Dart impact equipped with measuring instruments | | ASTMD3763 | 65.0 J |
| Dart impact equipped with measuring instruments | | ASTMD3763 | 62.0 J |
| Mechanical properties | Test Condition | Test Method | Test Result |
|---|
| Tensile modulus | | ASTMD638 | 1610 Mpa |
| Tensile modulus | | ISO527-2 | 1570 Mpa |
| tensile strength | | ASTMD638,ISO527-2 | 45.0 Mpa |
| tensile strength | | ASTMD638 | 52.0 Mpa |
| tensile strength | | ISO527-2 | 51.0 Mpa |
| elongation | | ASTMD638,ISO527-2 | 7.0 % |
| elongation | | ASTMD638,ISO527-2 | 140 % |
| Flexural modulus | | ASTMD790 | 1520 Mpa |
| Flexural modulus | | ISO178 | 1490 Mpa |
| Bending stress | | ISO178 | 60.0 Mpa |
| Bending stress | | ASTMD790 | 64.0 Mpa |
| Thermal performance | Test Condition | Test Method | Test Result |
|---|
| Heat Deflection Temperature | | ASTMD648 | 101 °C |
| Heat Deflection Temperature | | ASTMD648 | 85.0 °C |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.
Compare
View Prices