Technical Data Sheet
| physical property | Test Condition | Test Method | Test Result |
|---|
| gloss | | ASTM D-2457 | 50 |
| other | Test Condition | Test Method | Test Result |
|---|
| | | 吹塑薄膜级 |
| Basic performance | Test Condition | Test Method | Test Result |
|---|
| density | | ASTM D-1505 | 0.918 g/cm |
| melt mass-flow rate | | ASTM D-1283 | 2 g/10min |
| Mechanical properties | Test Condition | Test Method | Test Result |
|---|
| 1% tensile modulus at break | | ASTM D-882 | 195 Mpa |
| 1% tensile modulus at break | | ASTM D-882 | 220 Mpa |
| Tensile impact strength of thin film | | ASTM D-882 | 31 Mpa |
| Tensile impact strength of thin film | | ASTM D-882 | 23 Mpa |
| Puncture | | Equate | 60 J/mm |
| Dart Drop impact strength | | ASTM D-1709A | 85 gms |
| elongation | | ASTM D-882 | 450 % |
| elongation | | ASTM D-882 | 600 % |
| Other performance | Test Condition | Test Method | Test Result |
|---|
| muddy | | ASTM D-1003 | 14 % |
| MWD | | Equate | narrow |
| Physical properties | Test Condition | Test Method | Test Result |
|---|
| density | | ASTM D792/ISO 1183 | 0.918 |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.
Compare
View Prices