Unspecified VisiJet® FTI Red
0
- Usages:molding
CompareTechnical Data Sheet
| physical property | Test Condition | Test Method | Test Result |
|---|---|---|---|
| density | 1.08 g/cm³ |
| hardness | Test Condition | Test Method | Test Result |
|---|---|---|---|
| Shore hardness | 65to70 |
| Mechanical properties | Test Condition | Test Method | Test Result |
|---|---|---|---|
| Tensile modulus | ASTM D638 | 400to600 MPa | |
| tensile strength | ASTM D638 | 8.00to18.0 MPa | |
| elongation | Break | ASTM D638 | 2.0to4.0 % |
| Flexural modulus | ASTM D790 | 500to700 MPa | |
| bending strength | ASTM D790 | 16.0to22.0 MPa |
| Impact resistance | Test Condition | Test Method | Test Result |
|---|---|---|---|
| Suspended wall beam without notch impact strength | ASTM D256 | 17 J/m |
| Thermal performance | Test Condition | Test Method | Test Result |
|---|---|---|---|
| Glass Transition Temperature | DMA | 77.0 °C | |
| Heat distortion temperature | ASTM D648 | 50 °C |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.
Contact Us
Get App
Top