Technical Data Sheet
| physical property | Test Condition | Test Method | Test Result |
|---|
| density | | ISO 1183 | 1.37 g/cm³ |
| melt mass-flow rate | | ISO 1133 | 28to38 g/10min |
| Shrinkage rate | | ISO 294-4 | 0.86 % |
| Shrinkage rate | | ISO 294-4 | 0.82 % |
| Water absorption rate | | ISO 62 | 0.80 % |
| flammability | Test Condition | Test Method | Test Result |
|---|
| UL flame retardant rating | | UL 94 | V-0 |
| Impact resistance | Test Condition | Test Method | Test Result |
|---|
| Impact strength of cantilever beam gap | | ISO 180/A | 6.5 kJ/m² |
| Mechanical properties | Test Condition | Test Method | Test Result |
|---|
| Tensile modulus | | ISO 527-2 | 2700 MPa |
| tensile strength | | ISO 527-2 | 88.0 MPa |
| Tensile strain | Yield | ISO 527-2 | 6.5 % |
| Flexural modulus | | ISO 178 | 2650 MPa |
| bending strength | | ISO 178 | 120 MPa |
| Electrical performance | Test Condition | Test Method | Test Result |
|---|
| Surface Resistivity | | IEC 60093 | >1.0E+15 ohms |
| Dissipation Factor | | IEC 60250 | 1.7E-03 |
| Dissipation Factor | | IEC 60250 | 0.014 |
| Compared to the Leakage Tracking Index (CTI) | | IEC 60112 | PLC 4 |
| Volume resistivity | | IEC 60093 | >1.0E+15 ohms·cm |
| dielectric strength | | IEC 60243-1 | 37 kV/mm |
| dielectric constant | | IEC 60250 | 3.90 |
| dielectric constant | | IEC 60250 | 3.80 |
| Thermal performance | Test Condition | Test Method | Test Result |
|---|
| Heat distortion temperature | | ISO 75-2/A | 205 °C |
| Glass Transition Temperature | | ISO 11357-2 | 225 °C |
| Linear coefficient of thermal expansion | | ISO 11359-2 | 5.2E-05 cm/cm/°C |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.
Compare