PA6 B3 GF 30 S1 black (1281)
0
- Properties:Fillerglass fiber reinforced material30%filler by weight
- Usages:ApplicationsEnclosuresPowerand Other Tools in the Automotive Industry
CompareTechnical Data Sheet
| physical property | Test Condition | Test Method | Test Result |
|---|---|---|---|
| Melt volume flow rate | ISO1133 | 25.0 cm³/10min | |
| Shrinkage rate | ISO294-4 | 0.90 % | |
| ISO294-4 | 0.40 % | ||
| density | ISO1183 | 1.35 g/cm³ |
| flammability | Test Condition | Test Method | Test Result |
|---|---|---|---|
| burning rate | FMVSS302 | <100 mm/min | |
| FlameRating | UL94 | HB |
| Mechanical properties | Test Condition | Test Method | Test Result |
|---|---|---|---|
| Tensile strain | Break | ISO527-2/5 | 3.5 % |
| Flexural modulus | ISO178 | 8300 MPa | |
| Tensile modulus | ISO527-2/1 | 8800 MPa | |
| Tensile stress | Break | ISO527-2/5 | 150 MPa |
| Impact resistance | Test Condition | Test Method | Test Result |
|---|---|---|---|
| Charpy Notched Impact Strength | ISO179/1eA | 10 kJ/m² | |
| ISO179/1eA | 15 kJ/m² | ||
| Impact strength of simply supported beam without notch | ISO179/1eU | 85 kJ/m² |
| Thermal performance | Test Condition | Test Method | Test Result |
|---|---|---|---|
| ISO75-2/A | 190 °C | ||
| melting temperature | DINEN11357-1 | 222 °C |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.
Contact Us
Get App
Top