
POM M450-44 JAPAN POLYPLASTIC
119
Form:Granules | Grade:High liquidity level
Properties:
Low friction coefficienthigh viscosity
Typical Applications:
Bottle capElectronic and electrical components
Product Description
Certificates(1)
Datasheet
Product Description
| Typical Applications: | Bottle cap | Electronic and electrical components |
| Properties: | Low friction coefficient | high viscosity |
Certificates

Technical Data Sheet
| mechanical properties | Test Condition | Test Method | Test Result | Test Unit |
|---|---|---|---|---|
| Bending modulus | ASTM D-790 | 2580 | Mpa | |
| tensile strength | ASTM D-638 | 60 | Mpa | |
| bending strength | ASTM D-790 | 89 | Mpa | |
| Impact strength of cantilever beam gap | ASTM D-256 | 37 | J/m | |
| elongation | ASTM D-638 | 25 | % | |
| thermal performance | Test Condition | Test Method | Test Result | Test Unit |
| UL flame retardant rating | UL 94 | HB | ||
| Hot deformation temperature | 1.82Mpa | ASTM D-648 | 110 | °C |
| Physical properties | Test Condition | Test Method | Test Result | Test Unit |
| density | ASTM D-792 | 1.41 |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.