Technical Data Sheet
| Uncured Properties | Test Condition | Test Method | Test Result |
|---|
| density | | | 0.958 g/cm³ |
| density | | | 1.05 g/cm³ |
| viscosity | | ASTMD2393 | 0.10 Pa·s |
| viscosity | | ASTMD2393 | 0.20 Pa·s |
| viscosity | | ASTMD2393 | 0.30 Pa·s |
| viscosity | | ASTMD2393 | 72 hr |
| viscosity | | ASTMD2393 | 60到90 min |
| colour | | | Amber |
| colour | | | Clear/Transparent |
| thermosetting | Test Condition | Test Method | Test Result |
|---|
| Thermoset Components | | | 按重量计算的混合比:100 |
| Thermoset Components | | | 按重量计算的混合比:25 |
| Thermoset Components | | | 52 wk |
| hardness | Test Condition | Test Method | Test Result |
|---|
| Shore Hardness | Shore A | ASTMD2240 | 90 |
| Mechanical properties | Test Condition | Test Method | Test Result |
|---|
| tensile strength | | ASTMD638 | 6.89 MPa |
| elongation | Break | ASTMD638 | 75 % |
| Electrical performance | Test Condition | Test Method | Test Result |
|---|
| Dissipation Factor | | ASTMD150 | 0.020 |
| Volume resistivity | | ASTMD257 | 1E+14 ohms·cm |
| dielectric strength | | ASTMD149 | 15 kV/mm |
| dielectric constant | | ASTMD150 | 3.50 |
| Thermal performance | Test Condition | Test Method | Test Result |
|---|
| Linear thermal expansion coefficient | | | 6E-05 cm/cm/°C |
| thermal conductivity | | | 0.23 W/m/K |
| Service | | | 105 °C |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.
Compare