HDPE HWB-1051
0
CompareTechnical Data Sheet
| physical property | Test Condition | Test Method | Test Result |
|---|---|---|---|
| melt mass-flow rate | ASTMD1238 | 10 g/10min | |
| Resistance to environmental stress cracking | ASTMD1693 | >1000 hr | |
| ASTMD1693B | 150 hr | ||
| density | ASTMD1505 | 0.951 g/cm³ | |
| melt mass-flow rate | ASTMD1238 | 0.060 g/10min |
| Supplementary Information | Test Condition | Test Method | Test Result |
|---|---|---|---|
| Blow molding temperature | 190到210 °C |
| Mechanical properties | Test Condition | Test Method | Test Result |
|---|---|---|---|
| tensile strength | ASTMD638 | 24.8 MPa | |
| elongation | ASTMD638 | 800 % | |
| Flexural modulus | Compression Molded | ASTMD790 | 1070 MPa |
| Impact resistance | Test Condition | Test Method | Test Result |
|---|---|---|---|
| Tensile impact strength | Compression Molded | ASTMD1822 | 347 kJ/m² |
| Thermal performance | Test Condition | Test Method | Test Result |
|---|---|---|---|
| brittle temperature | ASTMD746 | <-90.0 °C | |
| ASTMD648 | 44.0 °C | ||
| vicat | ASTMD1525 | 129 °C |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.
Contact Us
Get App
Top