
Product Description
Certificates(0)
Datasheet
Product Description
Certificates
No Data...
Technical Data Sheet
| impact performance | Test Condition | Test Method | Test Result | Test Unit |
|---|---|---|---|---|
| Impact strength of simply supported beam without notch | 23℃23°C | ISO 179/1eU | 95 | kJ/m² |
| -30℃-30°C | ISO 179/1eU | 90 | kJ/m² | |
| mechanical properties | Test Condition | Test Method | Test Result | Test Unit |
| tensile strength | 23℃23°C | ISO 527-2 | 310 | Mpa |
| Tensile strain | Yield,23℃Yield,23°C | ISO 527-2 | 2.2 | % |
| Tensile modulus | 23℃23°C | ISO 527-2 | 25000 | Mpa |
| bending strength | 23℃23°C | ISO 178 | 435 | Mpa |
| Bending modulus | 23℃23°C | ISO 178 | 21000 | Mpa |
| Bending strain | ISO 178 | 2.6 | % | |
| thermal performance | Test Condition | Test Method | Test Result | Test Unit |
| Linear coefficient of thermal expansion | DIN 53752 | 0.000014 | 1/℃ | |
| Continuous use temperature | UL 746B | 120 | °C | |
| thermal conductivity | DIN 52612 | 0.5 | W/m/K | |
| Linear coefficient of thermal expansion | 最大使用温度 | 160 | °C | |
| Physical properties | Test Condition | Test Method | Test Result | Test Unit |
| density | ISO 1183 | 1.28 | g/cm³ | |
| Shrinkage rate | DIN 16901 | 0.10-0.40 | % | |
| Water absorption rate | <1.0 | % | ||
| Electrical performance | Test Condition | Test Method | Test Result | Test Unit |
| Surface resistivity | IEC 60093 | <1000 | Ω.cm | |
| insulation resistance | <1000 | Ohm | ||
| flame retardant performance | Test Condition | Test Method | Test Result | Test Unit |
| UL flame retardant rating | 1.00mm | UL -94 | HB |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.