
PA12 GTR45 EMS-CHEMIE SWITZERLAND
141
Form:Granules | Grade:Injection grade
Properties:
Alcohol resistanceResistance to stress crac
Typical Applications:
Household daily necessitiesIndustrial applications
Product Description
Certificates(0)
Datasheet
Product Description
| Typical Applications: | Household daily necessities | Industrial applications |
| Properties: | Alcohol resistance | Resistance to stress crac |
Certificates
No Data...
Technical Data Sheet
| flammability | Test Condition | Test Method | Test Result | Test Unit |
|---|---|---|---|---|
| ISO Type | ISO 1874 | PA6I/6T, FT, 11-030 | ||
| Flammability level | UL 94 | V-2 | ||
| mechanical properties | Test Condition | Test Method | Test Result | Test Unit |
| Nominal tensile fracture strain | ISO 527-2 | > 50 | % | |
| Tensile strain | Yield | ISO 527-2 | 5.0 | % |
| tensile strength | Yield | ISO 527-2 | 100 | Mpa |
| Tensile modulus | ISO 527-2 | 3000 | Mpa | |
| thermal performance | Test Condition | Test Method | Test Result | Test Unit |
| Linear coefficient of thermal expansion | Across Flow | ISO 11359-2 | 6.0E-5 | cm/cm/°C |
| Flow | ISO 11359-2 | 6.0E-5 | cm/cm/°C | |
| Glass transition temperature | ISO 11357-2 | 125 | °C | |
| Continuous use temperature | --4 | Internal Method | 70.0 | °C |
| --3 | ISO 2578 | 40.0 to 60.0 | °C | |
| Hot deformation temperature | 1.8 MPa, Unannealed | ISO 75-2/A | 105 | °C |
| 0.45 MPa, Unannealed | ISO 75-2/B | 115 | °C | |
| Physical properties | Test Condition | Test Method | Test Result | Test Unit |
| Water absorption rate | Equilibrium, 23°C, 50% RH | ISO 62 | 2.0 | % |
| Saturation, 23°C | ISO 62 | 7.0 | % | |
| Shrinkage rate | Flow | ISO 294-4 | 0.30 | % |
| 横向Flow | ISO 294-4 | 0.50 | % | |
| Electrical performance | Test Condition | Test Method | Test Result | Test Unit |
| Dielectric strength | IEC 60243-1 | 27 | KV/mm | |
| Volume resistivity | IEC 60093 | 1.0E+14 | ohms·cm | |
| Surface resistivity | IEC 60093 | -- | ohms | |
| hardness | Test Condition | Test Method | Test Result | Test Unit |
| Ball Pressure Test | ISO 2039-1 | 145 | Mpa |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.