PA66 Ultramid® A3WG6-BK
33
- Properties:High rigidityOil resistantdimensional stabilityheat-resisting
- Usages:machineMechanical componentscontainerProfileAutomotive sectorShell
Compare
View PricesTechnical Data Sheet
| physical property | Test Condition | Test Method | Test Result |
|---|---|---|---|
| Water absorption rate | ISO 62 | 5.5 % | |
| ISO 62 | 1.7 % |
| flammability | Test Condition | Test Method | Test Result |
|---|---|---|---|
| UL flame retardant rating | UL 94 | HB | |
| UL 94 | HB | ||
| UL 94 | HB |
| Mechanical properties | Test Condition | Test Method | Test Result |
|---|---|---|---|
| tensile strength | ISO 527-2 | 179 Mpa | |
| Tensile strain | ISO 527-2 | 2.6 % | |
| Flexural modulus | ISO 178 | 8730 Mpa |
| injection | Test Condition | Test Method | Test Result |
|---|---|---|---|
| drying temperature | 80 °C | ||
| drying time | 2.0 to 4.0 hr | ||
| Suggested maximum moisture content | 0.15 % | ||
| Processing (melt) temperature | 280 to 305 °C | ||
| Temperature | 80 to 90 °C | ||
| Injection Pressure | 3.50 to 12.5 Mpa | ||
| injection speed | 快速 |
| Thermal performance | Test Condition | Test Method | Test Result |
|---|---|---|---|
| Heat distortion temperature | ISO 75-2/A | 250 °C | |
| melting temperature | ISO 3146 | 260 °C | |
| RTI Elec | UL 746 | 125 °C | |
| UL 746 | 125 °C | ||
| UL 746 | 125 °C | ||
| RTI Imp | UL 746 | 115 °C | |
| UL 746 | 120 °C | ||
| RTI | UL 746 | 115 °C | |
| UL 746 | 130 °C |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.
Contact Us
Get App
Top