HDPE KW Plastics KWR102-8812 BLK KW Plastics

Compare

Technical Data Sheet

physical property	Test Condition	Test Method	Test Result
density		ASTMD792	0.960 g/cm³
melt mass-flow rate		ASTMD1238	0.30 g/10min

Supplementary Information	Test Condition	Test Method	Test Result
polypropylene		ASTM D5576	<8.0 %
weight loss on heating		内部方法	<0.070 %

Mechanical properties	Test Condition	Test Method	Test Result
tensile strength	Yield	ASTM D638	>21.4 MPa
tensile strength	tensile strength	Yield	ISO 527-2	25.0 MPa
Flexural modulus		ASTM D790	965 MPa
Flexural modulus	Flexural modulus		ISO 178	1370 MPa
Poisson's ratio		ISO 527	0.49

Impact resistance	Test Condition	Test Method	Test Result
Impact strength of cantilever beam gap		ASTM D256	无断裂
Impact strength of cantilever beam gap	Impact strength of cantilever beam gap		ISO 180/1A	6.1 kJ/m²

Thermal performance	Test Condition	Test Method	Test Result
Heat distortion temperature		ISO 75-2/A	53.5 °C

IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.

Get App

Top