PPO/PA GTX914-14101 SABIC EU

Form：Granules

Properties:

Hydrolysis resistanceHigh temperature resistanDimensional stabilityHigh mobilityExcellent impact resistanTemperature resistanceChemical properties and p

Typical Applications:

Industrial machineryElectrical applications

Supplier(1)

Product Description

Certificates(0)

Datasheet

Product Description

Typical Applications:	Industrial machinery \| Electrical applications
Properties:	Hydrolysis resistance \| High temperature resistan \| Dimensional stability \| High mobility \| Excellent impact resistan \| Temperature resistance \| Chemical properties and p

Certificates

No Data...

Technical Data Sheet

Other performance	Test Condition	Test Method	Test Result	Test Unit
Extreme Oxygen Index		ISO 4589	21	%
Basic Performance	Test Condition	Test Method	Test Result	Test Unit
Water absorption rate		DIN 53495	3.50	%
density		ISO 1183	1.09
mechanical properties	Test Condition	Test Method	Test Result	Test Unit
elongation	50mm/min,Break	ISO 527	60	%
elongation	elongation	50mm/min,Yield	ISO 527	7.5	%
tensile strength	50mm/min,Break	ISO 527	55	Mpa
tensile strength	tensile strength	50mm/min,Yield	ISO 527	55	Mpa
Impact strength of cantilever beam gap	-30℃ 有Notched	ISO 180/1A	15	KJ/m
Impact strength of cantilever beam gap	Impact strength of cantilever beam gap	23℃ 有Notched	ISO 180/1A	30	KJ/m
Charpy Notched Impact Strength	23℃	ISO 179/2C	30	KJ/m
Bending modulus	2mm/min	ISO 178	2000	Mpa
bending strength	2mm/min	ISO 178	80	Mpa
Tensile modulus	1mm/min	ISO 527	2100	Mpa
thermal performance	Test Condition	Test Method	Test Result	Test Unit
Hot deformation temperature	B/120	ISO 306	195	°C
	Hot deformation temperature	B/50	ISO 306	190	°C
	Hot deformation temperature	Hot deformation temperature	A/50	ISO 306	245	°C
Linear coefficient of thermal expansion		DIN 53752	9E-05	1/℃
thermal conductivity		DIN 52612	0.23	W/m℃
Physical properties	Test Condition	Test Method	Test Result	Test Unit
Shore hardness	H358/30	ISO 2039/1	90	Mpa
Electrical performance	Test Condition	Test Method	Test Result	Test Unit
Dissipation factor	1MHz	IEC 250	0.0240
Dissipation factor	Dissipation factor	50Hz	IEC 250	0.0720
Dielectric strength		IEC 243	20.0	KV/mm

IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.

Get App

Top