Technical Data Sheet
| physical property | Test Condition | Test Method | Test Result |
|---|
| Apparent density | | ISO 60 | 0.80 g/cm³ |
| Melt volume flow rate | | ISO 1133 | 20.0 cm3/10min |
| Shrinkage rate | | ISO 2577 | 0.80 % |
| Shrinkage rate | | ISO 2577 | 0.80 % |
| Shrinkage rate | | ISO 2577 | 0.80 % |
| Shrinkage rate | | ISO 2577 | 0.80 % |
| Water absorption rate | | ISO 62 | 0.30 % |
| Water absorption rate | | ISO 62 | 0.10 % |
| hardness | Test Condition | Test Method | Test Result |
|---|
| ball-indentation hardness | | ISO 2039-1 | 93.0 Mpa |
| flammability | Test Condition | Test Method | Test Result |
|---|
| UL flame retardant rating | | UL 94 | V-0 |
| Burning wire flammability index | | IEC 60695-2-12 | 960 °C |
| Hot filament ignition temperature | | IEC 60695-2-13 | 775 °C |
| Hot filament ignition temperature | | IEC 60695-2-13 | 775 °C |
| Hot filament ignition temperature | | IEC 60695-2-13 | 775 °C |
| Supplementary Information | Test Condition | Test Method | Test Result |
|---|
| ISO Shortcut | | ISO 7792 | PBT+PC.GFHLMPR.11-020 |
| Impact resistance | Test Condition | Test Method | Test Result |
|---|
| Impact strength of simply supported beam without notch | | ISO 179/1eU | NoBreak |
| Suspended wall beam without notch impact strength | | ISO 180/1U | NoBreak |
| Suspended wall beam without notch impact strength | | ISO 180/1U | NoBreak |
| Impact strength of simply supported beam without notch | | ISO 179/1eU | NoBreak |
| Mechanical properties | Test Condition | Test Method | Test Result |
|---|
| tensile strength | | ISO 527-2/50 | 45.0 Mpa |
| Tensile strain | | ISO 527-2/50 | 3.5 % |
| Nominal tensile fracture strain | | ISO 527-2/50 | >20 % |
| Flexural modulus | | ISO 178/A | 2000 Mpa |
| bending strength | | ISO 178/A | 65.0 Mpa |
| bending strength | | ISO 178/A | 70.0 Mpa |
| Bending Strain | | ISO 178/A | 5.0 % |
| Tensile modulus | | ISO 527-2/1 | 2000 Mpa |
| Electrical performance | Test Condition | Test Method | Test Result |
|---|
| Compared to the Leakage Tracking Index (CTI) | | IEC 60112 | V |
| Thermal performance | Test Condition | Test Method | Test Result |
|---|
| Linear coefficient of thermal expansion | | ISO 11359-2 | 1E-04 cm/cm/°C |
| Linear coefficient of thermal expansion | | ISO 11359-2 | 1.1E-04 cm/cm/°C |
| Heat distortion temperature | | ISO 75-2/B | 100 °C |
| Heat distortion temperature | | ISO 75-2/A | 75.0 °C |
| vicat | | ISO 306/B120 | 115 °C |
| melting temperature | | ISO 11357-3 | 225 °C |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.
Compare
View Prices