Technical Data Sheet
| physical property | Test Condition | Test Method | Test Result |
|---|
| density | | ASTM D792 | 1.06 g/cm³ |
| hardness | Test Condition | Test Method | Test Result |
|---|
| Shore hardness | Shore A | ASTM D2240 | 70 |
| flammability | Test Condition | Test Method | Test Result |
|---|
| UL flame retardant rating | | UL 94 | V-1 |
| elastomer | Test Condition | Test Method | Test Result |
|---|
| tensile strength | Yield | ASTM D412 | 9.00 MPa |
| elongation | Break | ASTM D412 | 400 % |
| aging | Test Condition | Test Method | Test Result |
|---|
| Change rate of tensile strength in air | | | -20 % |
| Change rate of ultimate elongation in air | | | -20 % |
| Electrical performance | Test Condition | Test Method | Test Result |
|---|
| Dissipation Factor | | ASTM D150 | 4E-03 |
| Volume resistivity | | ASTM D257 | >1.0E+13 ohms·cm |
| dielectric strength | | ASTM D149 | 28 kV/mm |
| dielectric constant | | ASTM D150 | 2.70 |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.
Compare