Technical Data Sheet
| physical property | Test Condition | Test Method | Test Result |
|---|
| density | | ISO1183 | 1.25 g/cm³ |
| Shrinkage rate | | ISO294-4 | 0.70 % |
| Shrinkage rate | | ISO294-4 | 0.40 % |
| flammability | Test Condition | Test Method | Test Result |
|---|
| UL flame retardant rating | | UL94 | HB |
| UL flame retardant rating | | UL94 | HB |
| UL flame retardant rating | | IEC60695-11-10,-20 | HB |
| UL flame retardant rating | | IEC60695-11-10,-20 | HB |
| FMVSS flammability | | FMVSS302 | B |
| Burning rate 3 | | ISO3795 | <100 mm/min |
| Impact resistance | Test Condition | Test Method | Test Result |
|---|
| Impact strength of simply supported beam without notch | | ISO179/1eU | 60 kJ/m² |
| Charpy Notched Impact Strength | | ISO179/1eA | 5.0 kJ/m² |
| Charpy Notched Impact Strength | | ISO179/1eA | 6.0 kJ/m² |
| Mechanical properties | Test Condition | Test Method | Test Result |
|---|
| Tensile modulus | | ISO527-2 | 5500 Mpa |
| Tensile stress | | ISO527-2 | 125 Mpa |
| Tensile strain | | ISO527-2 | 3.5 % |
| Flexural modulus | | ISO178 | 4900 Mpa |
| Bending stress | | ISO178 | 210 Mpa |
| Electrical performance | Test Condition | Test Method | Test Result |
|---|
| Volume resistivity | | IEC60093 | 1E+15 ohms·cm |
| Thermal performance | Test Condition | Test Method | Test Result |
|---|
| | ISO75-2/B | 277 °C |
| | ISO75-2/A | 230 °C |
| melting temperature | | ISO11357-3 | 300 °C |
| | ISO11359-2 | 3.4E-05 cm/cm/°C |
| | ISO11359-2 | 3.4E-05 cm/cm/°C |
| | ISO11359-2 | 7.3E-05 cm/cm/°C |
| | ISO11359-2 | 7E-05 cm/cm/°C |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.
Compare
View Prices