PP ST868M LCY TAIWAN

226

Form：Granules | Grade：Injection grade

Properties:

Low temperature resistancHigh glossHigh mobility

Typical Applications:

Engine partsCurtain accessoriesPipe fittingsElectronic accessoriesOffice suppliesDrawer railsElectrical appliancesbottlecontainer

Supplier(1)

Product Description

Certificates(2)

Datasheet

Product Description

Typical Applications:	Engine parts \| Curtain accessories \| Pipe fittings \| Electronic accessories \| Office supplies \| Drawer rails \| Electrical appliances \| bottle \| container
Properties:	Low temperature resistanc \| High gloss \| High mobility

Certificates

RoHS

Technical Data Sheet

impact performance	Test Condition	Test Method	Test Result	Test Unit
Impact strength of cantilever beam gap	23°C	ASTM D256	37	J/m
mechanical properties	Test Condition	Test Method	Test Result	Test Unit
tensile strength	Yield	ASTM D638	28.4	Mpa
Bending modulus		ASTM D790	1030	Mpa
elongation	Yield	ASTM D638	12	%
thermal performance	Test Condition	Test Method	Test Result	Test Unit
Hot deformation temperature	HDT	ASTM D648	86	°C
Physical properties	Test Condition	Test Method	Test Result	Test Unit
Shrinkage rate	MD	ASTM D955	1.3	%
melt mass-flow rate	230°C/2.16kg	ASTM D1238	18	g/10min
density		ASTM D792	0.896	g/cm³
hardness	Test Condition	Test Method	Test Result	Test Unit
Rockwell hardness	R-Scale	ASTM D785	84

IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.

Get App

Top