Technical Data Sheet
| physical property | Test Condition | Test Method | Test Result |
|---|
| density | | ASTMD1475 | 1.08 g/cm³ |
| Specific volume | | | 0.926 cm³/g |
| Shrinkage rate | | ASTMD2566 | 2.5 % |
| thermosetting | Test Condition | Test Method | Test Result |
|---|
| | | 按重量计算的混合比:1.0 |
| | | 按重量计算的混合比:1.0 |
| STORAGE STABILITY | | ASTMD2471 | 6.0 min |
| Thermosetting mixed viscosity | | ASTMD2393 | 1400 cP |
| Post curing time | | | 4.0到8.0 hr |
| hardness | Test Condition | Test Method | Test Result |
|---|
| Shore A | ASTMD2240 | 80 |
| | ASTMD2240 | 30 |
| Supplementary Information | Test Condition | Test Method | Test Result |
|---|
| CureTime-Full | | | 1.0 day |
| HandleTime | | | 1.5 hr |
| elastomer | Test Condition | Test Method | Test Result |
|---|
| Tensile stress | | ASTMD412 | 5.90 MPa |
| tensile strength | Yield | ASTMD412 | 15.6 MPa |
| elongation | Break | ASTMD412 | 230 % |
| tear strength | | ASTMD624 | 34.5 kN/m |
| Electrical performance | Test Condition | Test Method | Test Result |
|---|
| dielectric constant | | ASTMD150 | 4.59 |
| Dissipation Factor | | ASTMD150 | 0.064 |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.
Compare