PC 04003 FR BK USA TPC
0
CompareTechnical Data Sheet
| physical property | Test Condition | Test Method | Test Result |
|---|---|---|---|
| Shrinkage rate | ASTM D-955 | 0.2 % |
| Basic performance | Test Condition | Test Method | Test Result |
|---|---|---|---|
| density | ASTM D-792 | 1.29 g/cm3 | |
| Water absorption rate | ASTM D-570 | 0.1 % |
| Mechanical properties | Test Condition | Test Method | Test Result |
|---|---|---|---|
| tensile strength | ASTM D-638 | 51.7 MPa | |
| elongation at break | ASTM D-638 | 5.8 % | |
| Flexural modulus | ASTM D-790 | 2610 MPa | |
| bending strength | ASTM D-790 | 79.3 MPa | |
| Impact strength of cantilever beam gap | ASTM D-256 | 107 J/m | |
| Suspended wall beam without notch impact strength | ASTM D-256 | 443 J/m |
| Electrical performance | Test Condition | Test Method | Test Result |
|---|---|---|---|
| Volume resistivity | ASTM D-257 | 1-1.0E+3 ohm·cm | |
| Surface Resistivity | ASTM D-257 | 1-1.0E+3 ohms |
| Thermal performance | Test Condition | Test Method | Test Result |
|---|---|---|---|
| Heat distortion temperature | ASTM D-648 | 127 ℃ | |
| Linear coefficient of thermal expansion | ASTM D-696 | 0.000063 cm/cm/℃ | |
| UL flame retardant rating | UL 94 | V-0 |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.
Contact Us
Get App
Top