PA46 TW363 DSM HOLAND

Form：Granules | Grade：Extrusion grade

Properties:

Thermal stability

Typical Applications:

CastersAutomotive Applications

Supplier(1)

Product Description

Certificates(0)

Datasheet

Product Description

Typical Applications:	Casters \| Automotive Applications
Properties:	Thermal stability

Certificates

No Data...

Technical Data Sheet

impact performance	Test Condition	Test Method	Test Result	Test Unit
Impact strength of cantilever beam gap	23°C	ISO 180/1A	80	kJ/m²
Impact strength of cantilever beam gap	Impact strength of cantilever beam gap	-40°C	ISO 180/1A	40	kJ/m²
Impact strength of simply supported beam without notch	23°C	ISO 179/1eU	无断裂
Impact strength of simply supported beam without notch	Impact strength of simply supported beam without notch	-30°C	ISO 179/1eU	无断裂
Charpy Notched Impact Strength	23°C	ISO 179/1eA	75	kJ/m²
Charpy Notched Impact Strength	Charpy Notched Impact Strength	-30°C	ISO 179/1eA	26	kJ/m²
mechanical properties	Test Condition	Test Method	Test Result	Test Unit
Bending modulus	160°C	ISO 178	350	Mpa
	Bending modulus	120°C	ISO 178	400	Mpa
	Bending modulus	Bending modulus	--	ISO 178	1800	Mpa
Nominal tensile fracture strain	160°C	ISO 527-2	> 50	%
	Nominal tensile fracture strain	120°C	ISO 527-2	> 50	%
	Nominal tensile fracture strain	Nominal tensile fracture strain	--	ISO 527-2	> 50	%
tensile strength	Yield, 160°C	ISO 527-2	30.0	Mpa
	tensile strength	Yield, 120°C	ISO 527-2	35.0	Mpa
	tensile strength	tensile strength	Yield	ISO 527-2	60.0	Mpa
Tensile modulus	160°C	ISO 527-2	350	Mpa
	Tensile modulus	120°C	ISO 527-2	400	Mpa
	Tensile modulus	Tensile modulus	--	ISO 527-2	1850	Mpa
thermal performance	Test Condition	Test Method	Test Result	Test Unit
Melting temperature		ISO 11357-3	295	°C
Linear coefficient of thermal expansion	Flow	ISO 11359-2	1.6E-4	cm/cm/°C
Linear coefficient of thermal expansion	Linear coefficient of thermal expansion	Across Flow	ISO 11359-2	1.8E-4	cm/cm/°C
Hot deformation temperature	1.8 MPa, Unannealed	ISO 75-2/A	90.0	°C
Hot deformation temperature	Hot deformation temperature	0.45 MPa, Unannealed	ISO 75-2/B	200	°C
Thermal Index - 5000 hr		IEC 60216	135	°C
Physical properties	Test Condition	Test Method	Test Result	Test Unit
Water absorption rate	Equilibrium, 23°C, 50% RH	ISO 62	3.0	%
Shrinkage rate	Flow	ISO 294-4	2.0	%
Shrinkage rate	Shrinkage rate	横向Flow	ISO 294-4	2.0	%
density		ISO 1183	1.10	g/cm³
Electrical performance	Test Condition	Test Method	Test Result	Test Unit
Volume resistivity		IEC 60093	1.0E+15	ohms·cm
Dielectric strength		IEC 60243-1	25	KV/mm
Relative permittivity	100 Hz	IEC 60250	3.60
Relative permittivity	Relative permittivity	1 MHz	IEC 60250	3.20
Compared to the anti leakage trace index		IEC 60112	PLC 1

IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.

Get App

Top