PC/PBT XENOY™ 1760 GY2802 SABIC INNOVATIVE US
190
- Properties:Chemical resistanceHigh mobilityGlass fiber reinforcedHigh impact resistance
- Usages:Automotive External Parts
Compare
View PricesTechnical Data Sheet
| 物理性能 | Test Condition | Test Method | Test Result |
|---|---|---|---|
| 熔体质量流动速率 | 250°C/5.0 kg | ASTM D1238 | 15 g/10 min |
| 熔融体积流量（MVR） | 265°C/5.0 kg | ISO 1133 | 27.0 cm3/10min |
| 收缩率 | 流动 : 3.20 mm | 内部方法 | 0.40 到 0.60 % |
| 横向流动 : 3.20 mm | 内部方法 | 0.40 到 0.60 % | |
| 吸水率 | 饱和, 23°C | ISO 62 | 0.50 % |
| 平衡, 23°C, 50% RH | ISO 62 | 0.15 % |
| 热性能 | Test Condition | Test Method | Test Result |
|---|---|---|---|
| 载荷下热变形温度 | 1.8 MPa, 未退火, 3.20 mm | ASTM D648 | 125 °C |
| 1.8 MPa, 未退火, 6.40 mm | ASTM D648 | 116 °C | |
| 1.8 MPa, 未退火, 4.00 mm, 64.0 mm 跨距 7 | ISO 75-2/Af | 101 °C | |
| 维卡软化温度 | -- | ASTM D15258 | 121 °C |
| -- | ISO 306/B50 | 135 °C | |
| -- | ISO 306/B120 | 130 °C | |
| 线性热膨胀系数 | 流动 : -40 到 40°C | ASTM E831, ISO 11359-2 | 3.9E-5 cm/cm/°C |
| 横向 : -40 到 40°C | ASTM E831 | 7.6E-5 cm/cm/°C | |
| 横向 : -40°C | ISO 11359-2 | 7.6E-5 cm/cm/°C |
| 机械性能 | Test Condition | Test Method | Test Result |
|---|---|---|---|
| 拉伸模量 | -- 1 | ASTM D638 | 5310 Mpa |
| -- | ISO 527-2/1 | 4800 Mpa | |
| 抗张强度 | 屈服 2 | ASTM D638 | 84.0 Mpa |
| 屈服 | ISO 527-2/5 | 84.0 Mpa | |
| 断裂 2 | ASTM D638 | 84.0 Mpa | |
| 断裂 | ISO 527-2/5 | 84.0 Mpa | |
| 伸长率 | 屈服 2 | ASTM D638 | 3.0 % |
| 屈服 | ISO 527-2/5 | 3.0 % | |
| 断裂 2 | ASTM D638 | 3.0 % | |
| 断裂 | ISO 527-2/5 | 3.0 % | |
| 弯曲模量 | 50.0 mm 跨距 3 | ASTM D790 | 3910 Mpa |
| -- 4 | ISO 178 | 4010 Mpa | |
| 弯曲应力 | -- 4, 5 | ISO 178 | 133 Mpa |
| 屈服, 50.0 mm 跨距 3 | ASTM D790 | 131 Mpa |
| 注射 | Test Condition | Test Method | Test Result |
|---|---|---|---|
| 干燥温度 | 110 °C | ||
| 干燥时间 | 4.0 到 6.0 hr | ||
| 建议的最大水分含量 | 0.020 % | ||
| 建议注射量 | 50 到 80 % | ||
| 料筒后部温度 | 250 到 270 °C | ||
| 料筒中部温度 | 255 到 275 °C | ||
| 料筒前部温度 | 260 到 280 °C | ||
| 射嘴温度 | 255 到 275 °C | ||
| 加工（熔体）温度 | 260 到 280 °C | ||
| 模具温度 | 65 到 95 °C | ||
| 背压 | 0.300 到 0.600 Mpa | ||
| 螺杆转速 | 50 到 80 rpm | ||
| 排气孔深度 | 0.013 到 0.020 mm |
| 冲击性能 | Test Condition | Test Method | Test Result |
|---|---|---|---|
| 装有测量仪表的落镖冲击 | -30°C, Energy at Peak | ASTM D3763 | 3.00 J |
| -30°C, Total Energy | ASTM D3763 | 3.00 J | |
| -20°C, Energy at Peak | ASTM D3763 | 4.00 J | |
| 23°C, Total Energy | ASTM D3763 | 8.00 J |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.
Contact Us
Get App
Top