PPS TRIBOFORCE® PPS C1800
0
- Properties:Fillerscarbon fiber reinforced materials
CompareTechnical Data Sheet
| physical property | Test Condition | Test Method | Test Result |
|---|---|---|---|
| density | ISO 1183 | 1.61 g/cm³ | |
| Shrinkage rate | ISO 294-4 | 0.050to0.20 % |
| Supplementary Information | Test Condition | Test Method | Test Result |
|---|---|---|---|
| Long term use temperature | Yes | ||
| Yes | |||
| No | |||
| No |
| Impact resistance | Test Condition | Test Method | Test Result |
|---|---|---|---|
| Charpy Notched Impact Strength | ISO 179/1eA | 2.0 kJ/m² | |
| Impact strength of simply supported beam without notch | ISO 179/1eU | 15 kJ/m² |
| Mechanical properties | Test Condition | Test Method | Test Result |
|---|---|---|---|
| Tensile modulus | ISO 527-2 | 16000 MPa | |
| tensile strength | ISO 527-2 | 115 MPa | |
| Tensile strain | Break | ISO 527-2 | 1.0 % |
| coefficient of friction | ASTMG137 | 0.29 | |
| ASTMG137 | 0.19 | ||
| Wear factor | ASTMG137 | 70 10^-8mm³/N·m | |
| ASTMG137 | 170 10^-8mm³/N·m |
| Thermal performance | Test Condition | Test Method | Test Result |
|---|---|---|---|
| melting temperature | ISO 11357-3 | 275 °C | |
| Linear coefficient of thermal expansion | ISO 11359-2 | 1.1E-05 cm/cm/°C | |
| ISO 11359-2 | 4.5E-05 cm/cm/°C |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.
Contact Us
Get App
Top