
PUR,Unspecified 10 Smooth-On, Inc
Product Description
Certificates(0)
Datasheet
Product Description
Certificates
No Data...
Technical Data Sheet
| elastomer | Test Condition | Test Method | Test Result | Test Unit |
|---|---|---|---|---|
| elongation | Break | ASTM D412 | 1000 | % |
| tensile strength | Break | ASTM D412 | 1.38 | MPa |
| tear strength | ASTM D624 | 6.65 | kN/m | |
| tensile strength | 100%Strain | ASTM D412 | 0.172 | MPa |
| thermosetting | Test Condition | Test Method | Test Result | Test Unit |
| stripping time | 960 | min | ||
| Thermosetting mixed viscosity | ASTM D2393 | 3100 | cP | |
| storage stability | 30 | min | ||
| Table drying time | 5.0 | min | ||
| Thermosetting mixed viscosity | ASTM D2393 | 400 | cP | |
| storage stability | ASTM D2471 | 1.5 | min | |
| Thermosetting components | PartB | 按重量计算的混合比:87.按容量计算的混合比:1.0 | ||
| PartA | 按重量计算的混合比:100.按容量计算的混合比:1.0 | |||
| Physical properties | Test Condition | Test Method | Test Result | Test Unit |
| Specific volume | 5.42to6.32 | cm³/g | ||
| density | ASTM D1475 | 0.150to0.170 | g/cm³ | |
| Shrinkage rate | MD | ASTM D955 | <0.10 | % |
| Specific volume | 1.01 | cm³/g | ||
| density | ASTM D1475 | 0.998 | g/cm³ | |
| hardness | Test Condition | Test Method | Test Result | Test Unit |
| Shore hardness | ShoreA | ASTM D2240 | 10 | |
| Supplementary Information | Test Condition | Test Method | Test Result | Test Unit |
| Mixing Ratio | 1:1byvolume1:1byweight | |||
| VolumetricExpansion | 6times | |||
| Operating intensity | 20.0 | min | ||
| CureTime | 2.0 | hr |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.