POM Copolymer GERMAFORM 9 MF 10 Kunststoff-Kontor-Hamburg GmbH
0
- Properties:FillerKunststoffKunststoffGermany
CompareTechnical Data Sheet
| physical property | Test Condition | Test Method | Test Result |
|---|---|---|---|
| density | ISO 1183 | 1.49 g/cm³ | |
| Melt volume flow rate | ISO 1133 | 7.00 cm³/10min |
| Mechanical properties | Test Condition | Test Method | Test Result |
|---|---|---|---|
| Tensile strain | Break | ISO 527-2 | 6.0 % |
| tensile strength | Break | ISO 527-2 | 60.0 MPa |
| Tensile modulus | ISO 527-2 | 3500 MPa |
| Impact resistance | Test Condition | Test Method | Test Result |
|---|---|---|---|
| Impact strength of simply supported beam without notch | ISO 179/1eU | 100 kJ/m² |
| Thermal performance | Test Condition | Test Method | Test Result |
|---|---|---|---|
| melting temperature | 166 °C |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.
Contact Us
Get App
Top