PC PANLITE® L-1250Z JIAXING TEIJIN
87
- Properties:High temperature resistanLow temperature resistancheat-resistingtransparent
- Usages:Nursing suppliesDisposable tablewareMedical suppliesElectronic fieldElectrical field
Technical Data Sheet
| machinability | Test Condition | Test Method | Test Result |
|---|---|---|---|
| Shrinkage rate | ASTM D-955 | 0.5-0.7 % |
| Basic Performance | Test Condition | Test Method | Test Result |
|---|---|---|---|
| Water absorption rate | 24hr,in 23℃ | ASTM D-570 | 0.2 % |
| mechanical properties | Test Condition | Test Method | Test Result |
|---|---|---|---|
| Bending modulus | ASTM D-790 | 2230(22700) Mpa(kgf/cm2) | |
| tensile strength | ASTM D-638 | 80(820) Mpa(kgf/cm2) | |
| Impact strength of cantilever beam gap | 艾氏、带Notched厚度3.2mm | ASTM D-256c | 880(90) J/m(kgf·cm/cm) |
| 艾氏、带Notched厚度6.4mm | ASTM D-256 | 140(14) J/m(kgf·cm/cm) | |
| Rockwell hardness | ASTM D-785 | 77 M标度 | |
| Elongation at Break | ASTM D-638 | 140 | |
| compressive strength | ASTM D-695 | 76(770) Mpa(kgf/cm2) | |
| bending strength | ASTM D-790 | 92(940) Mpa(kgf/cm2) | |
| Tensile modulus | ASTM D-638 | 2120(21600) Mpa(kgf/cm2) |
| thermal performance | Test Condition | Test Method | Test Result |
|---|---|---|---|
| Hot deformation temperature | 负荷1.813MPa(18.6kgf/cm) | ASTM D-648 | 132 °C |
| 负荷0.451MPa(4.6kgf/cm) | ASTM D-648 | 142 °C | |
| Temperature index | 厚度1.47mm | UL 746B | 125 °C |
| 厚度1.47mm | UL 746B | 115 °C | |
| Linear coefficient of thermal expansion | ASTM D-696 | 7 10-5cm/cm/℃ |
| Physical properties | Test Condition | Test Method | Test Result |
|---|---|---|---|
| density | ASTM D-792 | 1.2 | |
| Transmittance rate | 厚度3mm | ASTM D-1003 | 88 % |
| UL flame retardant rating | 1.47mm | UL 94 | 94V-2 |
| 3.05mm | UL 94 | 94V-2 | |
| Refractive index | ASTM D-542 | 1.585 |
| Electrical performance | Test Condition | Test Method | Test Result |
|---|---|---|---|
| Dielectric loss | 106Hz,Tangent | ASTM D-150 | 0.009 |
| 60Hz,Tangent | ASTM D-150 | 0.00040 | |
| Dielectric constant | 60Hz | ASTM D-150 | 2.95 |
| 106Hz | ASTM D-150 | 2.9 | |
| Dielectric strength | 快速加压值厚度1.6mm | ASTM D-149 | 30 KV/mm |
| Volume resistivity | ASTM D-257 | 3 1016Ω.cm | |
| Conductive Track Resistance (CTI) | IEC 112 | 300 V | |
| Arc resistance | ASTM D-495 | 100 sec |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.