PPO XYRON™ L544V 2X13392 ASAHI JAPAN
29
- Properties:High temperature resistanFlame retardantFiller: Filler40% filler by weight
- Usages:Automotive interior partsIndustrial machinery
Technical Data Sheet
| impact performance | Test Condition | Test Method | Test Result |
|---|---|---|---|
| Charpy Notched Impact Strength | 23°C | ISO 179 | 5.0 kJ/m² |
| flammability | Test Condition | Test Method | Test Result |
|---|---|---|---|
| UL flame retardant rating | 1.5mm | UL 94 | V-1 |
| mechanical properties | Test Condition | Test Method | Test Result |
|---|---|---|---|
| tensile strength | Yield,23°C | ISO 527-2 | 84.0 Mpa |
| Tensile strain | Break,23°C | ISO 527-2 | 2.0 % |
| Bending modulus | 23°C | ISO 178 | 8840 Mpa |
| bending strength | 23°C | ISO 178 | 143 Mpa |
| thermal performance | Test Condition | Test Method | Test Result |
|---|---|---|---|
| Hot deformation temperature | 1.8MPa,Unannealed | ASTM D648 | 120 °C |
| 1.8MPa,Unannealed | ISO 75-2/A | 118 °C | |
| Linear coefficient of thermal expansion | MD:-30to65°C | ISO 11359-2 | 3E-05 cm/cm/°C |
| Physical properties | Test Condition | Test Method | Test Result |
|---|---|---|---|
| Shrinkage rate | 2.00mm | Internal Method | 0.10-0.40 % |
| Water absorption rate | 23°C,24hr | ISO 62 | 0.060 % |
| Electrical performance | Test Condition | Test Method | Test Result |
|---|---|---|---|
| Surface resistivity | IEC 60093 | 1E+16 ohms | |
| Volume resistivity | 23°C | IEC 60093 | 1E+16 ohms·cm |
| Dielectric constant | 100Hz | IEC 60250 | 3.40 |
| 1MHz | IEC 60250 | 3.30 | |
| Dissipation factor | 100Hz | IEC 60250 | 7E-03 |
| 1MHz | IEC 60250 | 9E-03 |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.