ABS Rotec® ABS 1001 GF 10

Properties:
Filler
glass fiber reinforced material
10%
filler by weight
Compare

Technical Data Sheet

physical property	Test Method	Test Result
density	ISO 1183	1.12 g/cm³
melt mass-flow rate	ISO 1133	10 g/10min
Shrinkage rate	ISO 294-4	0.30to0.50 %
Water absorption rate	ISO 62	0.30 %

Mechanical properties	Test Method	Test Result
Tensile modulus	ISO 527-2	4000 MPa
tensile strength	ISO 527-2	61.0 MPa
Tensile strain	ISO 527-2	4.0 %
Flexural modulus	ISO 178	3500 MPa
bending strength	ISO 178	93.0 MPa

Impact resistance	Test Condition	Test Method	Test Result
Impact strength of simply supported beam without notch		ISO 179/1eU	20 kJ/m²

Thermal performance	Test Condition	Test Method	Test Result
vicat		ISO 306/B50	105 °C

IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.

Get App

Top