
Product Description
Certificates(0)
Datasheet
Product Description
| Properties: | High mobility |
Certificates
No Data...
Technical Data Sheet
| flammability | Test Condition | Test Method | Test Result | Test Unit |
|---|---|---|---|---|
| carbon emission | VDA277 | 25.0 | µg/g | |
| UL flame retardant rating | 3.0mm | UL 94 | HB | |
| 1.5mm | UL 94 | HB | ||
| Burning rate | 2.00mm | ISO 3795 | 55 | mm/min |
| Atomization | ISO 294-4 | 97 | % | |
| mechanical properties | Test Condition | Test Method | Test Result | Test Unit |
| bending strength | 3.20mm,InjectionMolded | ISO 178 | 68.0 | Mpa |
| Bending modulus | 3.20mm,InjectionMolded | ISO 178 | 2300 | Mpa |
| Tensile strain | Yield,3.20mm,InjectionMolded | ISO 527-2/50 | 2.5 | % |
| tensile strength | Yield,3.20mm,InjectionMolded | ISO 527-2/50 | 45.0 | Mpa |
| Tensile modulus | 3.20mm,Injection | ISO 527-2 | 2280 | Mpa |
| thermal performance | Test Condition | Test Method | Test Result | Test Unit |
| Vicat softening temperature | ISO 306/B50 | 97.0 | °C | |
| Hot deformation temperature | 1.8MPa,Annealed | ISO 75-2/A | 100 | °C |
| Physical properties | Test Condition | Test Method | Test Result | Test Unit |
| Shrinkage rate | MD | ISO 294-4 | 0.40-0.70 | % |
| melt mass-flow rate | 230°C/3.8kg | ISO 1133 | 5.0 | g/10min |
| 220°C/10.0kg | ISO 1133 | 15 | g/10min | |
| Apparent density | ISO 60 | 0.65 | g/cm³ |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.