LLDPE DFDC-7050

Properties:
Openness
easy to unravel properties
high melt viscosity
low elasticity
good film forming properties
and strong film puncture resistance
Usages:
Suitable for making film products
such as various agricultural films
plastic films
daily packaging bags
garbage bags
as well as various injection molded and agricultural small diameter drainage pipes
Compare

Technical Data Sheet

physical property	Test Condition	Test Method	Test Result
Haze ratio			优级｜≤14 %
	Haze ratio			一级｜- %
	Haze ratio	Haze ratio			合格｜- %

Basic performance	Test Condition	Test Method	Test Result
density			一级｜0.923±0.003 g/cm3
density	density			合格｜0.923±0.004 g/cm3
melt mass-flow rate			优级｜2.0±0.2 g/10min
	melt mass-flow rate			一级｜2.0±0.3 g/10min
	melt mass-flow rate	melt mass-flow rate			合格｜2.0±0.4 g/10min
density			优级｜0.923±0.002 g/cm3

Mechanical properties	Test Condition	Test Method	Test Result
tensile yield strength			优级｜≥8 MPa
	tensile yield strength			一级｜≥8 MPa
	tensile yield strength	tensile yield strength			合格｜≥8 MPa
Dart impact damage quality			一级｜- g
Dart impact damage quality	Dart impact damage quality			合格｜- g
tensile breaking strength			优级｜≥12.0 MPa
tensile breaking strength	tensile breaking strength			合格｜≥12.0 MPa
elongation	Break		优级｜≥500 %
	elongation	Break		一级｜≥500 %
	elongation	elongation	Break		合格｜≥500 %
Dart impact damage quality			优级｜≥60 g
tensile breaking strength			一级｜≥12.0 MPa

Other performance	Test Condition	Test Method	Test Result
Particle appearance			优级｜≤20 个/kg
	Particle appearance			一级｜≤20 个/kg
	Particle appearance	Particle appearance			合格｜≤40 个/kg
fish eye			合格｜≤8 个/1520cm2
Particle appearance			优级｜≤10 g/kg
	Particle appearance			一级｜≤10 g/kg
		Particle appearance			合格｜≤10 g/kg
			Particle appearance			优级｜≤10 个/kg
				Particle appearance			一级｜≤20 个/kg
				Particle appearance	Particle appearance			合格｜≤40 个/kg
fish eye			优级｜≤15 个/1520cm2
	fish eye			一级｜≤25 个/1520cm2
		fish eye			合格｜≤40 个/1520cm2
			fish eye			优级｜≤2 个/1520cm2
			fish eye	fish eye			一级｜≤4 个/1520cm2

IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.

Get App

Top