
POE A1050S MITSUI CHEM SINGAPORE
43
Form:Granules | Grade:Injection grade
Properties:
wear resistantToughening
Typical Applications:
CableFood packaging
Product Description
Certificates(0)
Datasheet
Product Description
| Typical Applications: | Cable | Food packaging |
| Properties: | wear resistant | Toughening |
Certificates
No Data...
Technical Data Sheet
| mechanical properties | Test Condition | Test Method | Test Result | Test Unit |
|---|---|---|---|---|
| Torsional stiffness | ASTM D1043 | 2.00 | Mpa | |
| elongation | Break | ASTM D638 | >1000 | % |
| tensile strength | Break | ASTM D638 | >3.00 | Mpa |
| thermal performance | Test Condition | Test Method | Test Result | Test Unit |
| Melting temperature | ASTM D2117 | <50.0 | °C | |
| Brittle temperature | ASTM D746 | <-70.0 | °C | |
| ASTM D746 | -70.0 | °C | ||
| Physical properties | Test Condition | Test Method | Test Result | Test Unit |
| Mooney viscosity | ML1+4 | JISK6395 | 40 | MU |
| melt mass-flow rate | 230°C/2.16kg | ASTM D1238 | 2.2 | g/10min |
| 190°C/2.16kg | ASTM D1238 | 1.2 | g/10min | |
| 190°C/2.16kg | ASTM D1238 | 0.40 | g/10min | |
| Electrical performance | Test Condition | Test Method | Test Result | Test Unit |
| Dissipation factor | ASTM D150 | <5.0E-4 | ||
| Dielectric constant | ASTM D150 | 2.20to2.40 | ||
| Volume resistivity | ASTM D257 | >1.0E+17 | ohms·cm | |
| Dissipation factor | ASTM D150 | 2E-04 | ||
| Dielectric constant | ASTM D150 | 2.30 | ||
| Dielectric strength | ASTM D149 | 48 | KV/mm | |
| Volume resistivity | ASTM D257 | 1E+17 | ohms·cm | |
| hardness | Test Condition | Test Method | Test Result | Test Unit |
| Shore hardness | ShoreA | ASTM D2240 | 57 |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.