PP 3210T8 HUIZHOU NPC

Form：Granules | Grade：Injection grade

Properties:

high strengthMineral fiber reinforced High rigidityUniform vertical and horiGood surfaceHeat resistancedimensional stability

Typical Applications:

Home appliance componentsLampshadeCar dashboardFor dashboardInterior decorative panelSide cover plate of range hoodPlastic toyHome appliance product parts

Supplier(0)

Product Description

Certificates(0)

Datasheet

Product Description

Typical Applications:	Home appliance components \| Lampshade \| Car dashboard \| For dashboard \| Interior decorative panel \| Side cover plate of range hood \| Plastic toy \| Home appliance product parts
Properties:	high strength \| Mineral fiber reinforced \| High rigidity \| Uniform vertical and hori \| Good surface \| Heat resistance \| dimensional stability

Certificates

No Data...

Technical Data Sheet

Basic Performance	Test Condition	Test Method	Test Result	Test Unit
melt mass-flow rate		ASTM D-1238	8	g/10min
mechanical properties	Test Condition	Test Method	Test Result	Test Unit
tensile strength	Yield	ASTM D-638	320	kg/cm
Bending modulus		ASTM D-790	42000	kg/cm
Impact strength of cantilever beam gap		ASTM D-256	3	kg.cm/cm
thermal performance	Test Condition	Test Method	Test Result	Test Unit
Hot deformation temperature	HDT	ASTM D-648	140	°C
Physical properties	Test Condition	Test Method	Test Result	Test Unit
Shrinkage rate		ASTM	0.8-1.2	%
Electrical performance	Test Condition	Test Method	Test Result	Test Unit
Dielectric strength		ASTM D-149	40	KV/mm

IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.

Get App

Top