
PC CLS1000 MITSUBISHI THAILAND
36
Form:Granules
Properties:
high viscosity
Typical Applications:
glasseslens
Product Description
Certificates(0)
Datasheet
Product Description
| Typical Applications: | glasses | lens |
| Properties: | high viscosity |
Certificates
No Data...
Technical Data Sheet
| mechanical properties | Test Condition | Test Method | Test Result | Test Unit |
|---|---|---|---|---|
| tensile strength | 23°C | ISO 527-2 | 60.0 | Mpa |
| Elongation at Break | 23°C | ISO 527-2 | 5.4 | % |
| Tensile modulus | 23°C | ISO 527-2 | 2400 | Mpa |
| bending strength | 23°C | ISO 178 | 93.0 | Mpa |
| Bending modulus | 23°C | ISO 178 | 2300 | Mpa |
| Charpy Notched Impact Strength | 23°C | ISO 179/1eA | 88 | kJ/m² |
| thermal performance | Test Condition | Test Method | Test Result | Test Unit |
| Hot deformation temperature | 0.45MPaUnannealed | ISO 75-2/Bf | 145 | °C |
| 1.80MPaAnnealed | ISO 75-2/Af | 131 | °C | |
| Linear coefficient of thermal expansion | MD | ISO 11359-2 | 6.5E-05 | cm/cm/°C |
| TD | ISO 11359-2 | 6.6E-05 | cm/cm/°C | |
| Physical properties | Test Condition | Test Method | Test Result | Test Unit |
| Water absorption rate | (23°C,24hr) | ISO 62 | 0.24 | % |
| melt mass-flow rate | 300℃/1.2Kg | ISO 1133 | 5.3 | cm3/10min |
| Electrical performance | Test Condition | Test Method | Test Result | Test Unit |
| Volume resistivity | IEC 60093 | 3E+16 | Ω.cm | |
| Surface resistivity | IEC 60093 | 6E+15 | Ω.cm | |
| Dielectric strength | IEC 60243-1 | 31 | KV/mm | |
| Dielectric constant | 23°C | IEC 60250 | 3.10 | 1MHz |
| Dissipation factor | 23°C | IEC 60250 | 9E-03 | 1MHz |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.