POM M270NAT CELANESE USA

Form：Granules | Grade：Injection grade

Properties:

Low molecular weightGood forming performanceHigh mobility

Typical Applications:

Household appliancesHousehold appliancesAutomotive sector

Supplier(1)

Product Description

Certificates(0)

Datasheet

Product Description

Typical Applications:	Household appliances \| Household appliances \| Automotive sector
Properties:	Low molecular weight \| Good forming performance \| High mobility

Certificates

No Data...

Technical Data Sheet

impact performance	Test Condition	Test Method	Test Result	Test Unit
Impact strength of cantilever beam gap	23°C	ISO 180/1A	5.4	kJ/m²
Impact strength of simply supported beam without notch	23°C	ISO 179/1eU	120	kJ/m²
Impact strength of simply supported beam without notch	Impact strength of simply supported beam without notch	-30°C	ISO 179/1eU	110	kJ/m²
Charpy Notched Impact Strength	23°C	ISO 179/1eA	5.2	kJ/m²
mechanical properties	Test Condition	Test Method	Test Result	Test Unit
tensile strength	Yield,23°C	ASTM D638	60.7	Mpa
Tensile modulus		ISO 527-2/1A/1	2800	Mpa
Bending modulus	23°C	ISO 178	2750	Mpa
Tensile creep modulus	1000hr	ISO 899-1	1300	Mpa
Tensile creep modulus	Tensile creep modulus	1hr	ISO 899-1	2300	Mpa
Tensile strain	Yield	ISO 527-2/1A/50	8.0	%
tensile strength	Yield	ISO 527-2/1A/50	67.0	Mpa
thermal performance	Test Condition	Test Method	Test Result	Test Unit
Hot deformation temperature	1.8MPa,Unannealed	ASTM D648	110	°C
Hot deformation temperature	Hot deformation temperature	1.8MPa,Unannealed	ISO 75-2/A	103	°C
Melting temperature		ISO 11357-3	166	°C
Hot deformation temperature	0.45MPa,Unannealed	ISO 75-2/B	156	°C
Linear coefficient of thermal expansion	TD	ISO 11359-2	1.2E-04	cm/cm/°C
Linear coefficient of thermal expansion	Linear coefficient of thermal expansion	MD	ISO 11359-2	1.1E-04	cm/cm/°C
Physical properties	Test Condition	Test Method	Test Result	Test Unit
density		ASTM D792	1.41	g/cm³
Water absorption rate	Equilibrium,23°C,50%RH	ISO 62	0.20	%
Water absorption rate	Water absorption rate	Saturation,23°C	ISO 62	0.75	%
Shrinkage rate	MD	ISO 294-4	1.7	%
	Shrinkage rate	TD	ISO 294-4	1.6	%
		Shrinkage rate	TD	ASTM D955	1.8	%
		Shrinkage rate	Shrinkage rate	MD	ASTM D955	2.2	%
Melt Volume Flow Rate (MVR)	190°C/2.16kg	ISO 1133	23.0	cm3/10min
density		ISO 1183	1.41	g/cm³
ThermalConductivityofMelt		Internal Method	0.16	W/m/K
SpecificHeatCapacity of Melt		Internal Method	2210	J/kg/°C
Density of Melt		Internal Method	1.200	g/cm³

IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.

Get App

Top