PBT B4406G4 Q113 BASF MALAYSIA

Form：Granules

Properties:

Flame retardant

Typical Applications:

Lighting applicationsswitchLaptop caseShellFor plug-in connectorsCoil holderLamp assemblyMotor componentsAutomotive electrical systems etcFor plug-in connectorsCoil holderLamp assemblyMotor componentsAutomotive electrical systems etc.

Supplier(1)

Product Description

Certificates(0)

Datasheet

Product Description

Typical Applications:	Lighting applications \| switch \| Laptop case \| Shell \| For plug-in connectors \| Coil holder \| Lamp assembly \| Motor components \| Automotive electrical systems \| etc \| For plug-in connectors \| Coil holder \| Lamp assembly \| Motor components \| Automotive electrical systems \| etc.
Properties:	Flame retardant

Certificates

No Data...

Technical Data Sheet

machinability	Test Condition	Test Method	Test Result	Test Unit
Mold temperature range	Injection成型		60-90	°C
Melt Temperature	Injection成型/挤出成型		260-280	°C
Basic Performance	Test Condition	Test Method	Test Result	Test Unit
Water absorption rate	在标准环增下23 ℃/50%相对湿度	ISO 62	0.2	%
Color	自然色（n），己着色（c），黑色（bk），特殊色（sp）		n.bk
Stickiness	0.05g/ml,苯酚/1.2二氯苯1.1	ISO 1628	112	ml/g
density		ISO 1183	1.58
Water absorption rate	在23 ℃水中	ISO 62	0.4	%
melt mass-flow rate	MVR275 ℃/ 2.16kg	ISO 1133	22	CM
mechanical properties	Test Condition	Test Method	Test Result	Test Unit
tensile strength	Yield，Break	ISO 527-2	117	Mpa
Tensile modulus		ISO 527-2	8350	Mpa
elongation	Yield，Break	ISO 527-2	2.2	%
Charpy Notched Impact Strength	+23 ℃	ISO 179/leU	36	KJ/m
Charpy Notched Impact Strength	Charpy Notched Impact Strength	+23 ℃	ISO 179/leA	6.1	KJ/m
thermal performance	Test Condition	Test Method	Test Result	Test Unit
Burning rate	按照电器用途绝缘材料试验方法BH	IEC 707	BH3-15mm/min	CLASS
Melting temperature	DSC 模塑料	ISO 3146	220-225	°C
Hot deformation temperature	1.8MPa负荷（HDT A）/0.45MPa负荷（HDT B）	ISO 75-2	180/215	°C
Burning rate	按照UL标准，1.6mm，0.8mm	UL 94	94v-0	CLASS
Physical properties	Test Condition	Test Method	Test Result	Test Unit
Shrinkage rate	Across Flow/Across Flow，试验片		0.4/1.0	%
Electrical performance	Test Condition	Test Method	Test Result	Test Unit
Dielectric constant	100MHz/1MHz	IEC 60250	3.5
Dissipation factor	100MHz/1MHz	IEC 60250	0.0024
Relative arc diameter index CTl	试验溶液A	IEC 60112	CTl200

IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.

Get App

Top