Technical Data Sheet
| physical property | Test Condition | Test Method | Test Result |
|---|
| melt mass-flow rate | | ISO 1133 | 1.6 g/10min |
| melt mass-flow rate | | ISO 1133 | 3.8 g/10min |
| Ethylene content | | 内部方法 | 32.0 mol% |
| hardness | Test Condition | Test Method | Test Result |
|---|
| Rockwell hardness | | ISO 2039-2 | 100 |
| Mechanical properties | Test Condition | Test Method | Test Result |
|---|
| Tensile modulus | | ISO 527-2 | 2700 Mpa |
| tensile strength | | ISO 527-2 | 34.0 Mpa |
| Tensile strain | | ISO 527-2 | 15 % |
| Flexural modulus | | ISO 178 | 3800 Mpa |
| Impact resistance | Test Condition | Test Method | Test Result |
|---|
| Suspended wall beam without notch impact strength | | ISO 180 | 2.9 kJ/m² |
| film | Test Condition | Test Method | Test Result |
|---|
| OTr | | ISO 14663-2 | 4E-03 cm³·mm/m²/atm/24hr |
| OTr | | ISO 14663-2 | 0.38 cm³·mm/m²/atm/24hr |
| OTr | | ISO 14663-2 | 6E-03 cm³·mm/m²/atm/24hr |
| OTr | | ISO 14663-2 | 8E-03 cm³·mm/m²/atm/24hr |
| OTr | | ISO 14663-2 | 0.030 cm³·mm/m²/atm/24hr |
| OTr | | ISO 14663-2 | 0.060 cm³·mm/m²/atm/24hr |
| Water Vapor Transmission Rate | | ASTME96 | 1.6 g·mm/m²/atm/24hr |
| Thermal performance | Test Condition | Test Method | Test Result |
|---|
| Crystallization peak temperature | | ISO 11357-3 | 161 °C |
| Glass Transition Temperature | | ISO 11357-2 | 69.0 °C |
| vicat | | ISO 306 | 173 °C |
| melting temperature | | ISO 11357-3 | 183 °C |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.
Compare
View Prices