TPU Quadrathane™ ALC-75A-B30
0
CompareTechnical Data Sheet
| physical property | Test Condition | Test Method | Test Result |
|---|---|---|---|
| density | ASTMD792 | 1.44 g/cm³ | |
| melt mass-flow rate | ASTMD1238 | 7.5 g/10min | |
| Shrinkage rate | ASTMD955 | 0.60到1.0 % |
| thermosetting | Test Condition | Test Method | Test Result |
|---|---|---|---|
| Post curing time | 6.0到10 hr |
| hardness | Test Condition | Test Method | Test Result |
|---|---|---|---|
| Shore A | ASTMD2240 | 75 |
| Mechanical properties | Test Condition | Test Method | Test Result |
|---|---|---|---|
| Flexural modulus | ASTMD790 | 5.52 MPa |
| elastomer | Test Condition | Test Method | Test Result |
|---|---|---|---|
| tensile strength | ASTMD412 | 2.41 MPa | |
| Tensile stress | ASTMD412 | 4.14 MPa | |
| ASTMD412 | 8.27 MPa | ||
| tensile strength | Break | ASTMD412 | 34.5 MPa |
| elongation | Break | ASTMD412 | 530 % |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.
Contact Us
Get App
Top